By There are a couple of ways to upgrade RAM in your laptop. The first is to check your laptop’s compatibility with the additional RAM. Then, you’ll need to remove the memory module and AC adapter. If your system is compatible with more RAM, proceed to the next step. Ground yourself before working in the laptop. Check the System Requirements to see if additional RAM is supported by your laptop.
It is true that you need to have a RAM of at least 1GB if you use your laptop for basic tasks such as watching videos, playing games and browsing the internet. There are many ways on how to upgrade RAM on laptop, but after I’ve tried some methods, I easily find out that upgrading RAM in your laptop is not a big thing anymore.
Ground yourself before working in a laptop
Before you start working in a laptop to upgrade its ram, you should ground yourself. Doing so will prevent any static electricity from building up, as static electricity travels through metal. To ground yourself, you should touch a conductive part, such as a metal wall light switch or kitchen faucet. To ground yourself while working, walk lightly while touching the metal surface, avoiding rubbing your body against it.
Check if your system supports additional RAM
In order to check if your system supports additional RAM, you must first determine the amount of RAM in your laptop. You can check the capacity of RAM by checking the motherboard spechsheet or by looking for the name of the manufacturer on the bottom cover of your laptop. Otherwise, you can use a system checker tool that will show you whether your system supports additional RAM. After this step, you must fill the empty slots with the same type of RAM.
Remove the AC adapter
You need to first remove the AC adapter if your laptop is not running on battery power. If you have just plugged in the AC adapter, you should remove the battery to avoid damaging the RAM. After removing the battery, turn the laptop upside down to ensure proper grounding. Then, unscrew the T5 screws holding the bottom plate. Be careful when unscrewing the screws and pry off the bottom plate with your fingers. You will want to locate the RAM slots, which are hidden beneath ribbon tape and metal brackets.
Remove the memory module
First, locate the RAM compartment, which is often covered by a plastic hatch. Your hard drive is most likely inside this larger compartment. Once you’ve found the memory compartment, unscrew two screws on either side to expose the slots and RAM modules. Clamps hold the memory modules in place; when you pull them out, they will pop up. To install the new RAM, align the new memory module’s pins with the groves on the RAM.
Install the memory module
To install the memory module to upgrade ram on your laptop, first open the bottom casing and remove the RAM enclosure. Using the tool that is provided, gently push the new memory module into the slot. Make sure that you do not touch any of the gold connectors. Then, line up the RAM module with the RAM slot and press down gently. You can also check to see if it has been installed correctly by opening the Task Manager or System Information window.
The above guide will surely help you in upgrading RAM on your laptop, that too by yourself. It also helps you to resurface the performance of your limited computer and make it better. This computer maintenance procedure is not hard, but being aware of what you are doing is important for success.
